Skid (Marc's) Log
Moderator: Chebass88
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Squat
Bar-10
155-5
265-5
375-2
440-1
480-1 vid
414-5,5, These went well. Had a couple reps to spare
Comp Bench
Bar-lots
155-5
265-2
308-1
352-1,1,1, Vid of 1st set - Messed up on my video title. These were a little harder than I wanted them to be.
297-3,3,3, - reps left in the tank for these
Strict BB rows
188-10,10,
Did GHR, Ab wheel and calf raises too
Bar-10
155-5
265-5
375-2
440-1
480-1 vid
414-5,5, These went well. Had a couple reps to spare
Comp Bench
Bar-lots
155-5
265-2
308-1
352-1,1,1, Vid of 1st set - Messed up on my video title. These were a little harder than I wanted them to be.
297-3,3,3, - reps left in the tank for these
Strict BB rows
188-10,10,
Did GHR, Ab wheel and calf raises too
-
- Registered User
- Posts: 2903
- Joined: Fri Oct 20, 2017 2:03 pm
- Location: Ft Collins, Colorado
- Age: 40
Re: Skid (Marc's) Log
damn skid. 415x5 is boss. what the hell are you eating???? i want to be as strong as you, forget about "when im your age". i want it now! could you have done that when you were 40?
- JohnHelton
- Registered User
- Posts: 4453
- Joined: Wed Apr 11, 2018 12:17 pm
- Location: Bozeman, MT
- Age: 51
- Contact:
Re: Skid (Marc's) Log
Great squatting, Skid!
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Thanks John!
Thanks Cole - I didn't really start lifting seriously until about 13 years ago or so. When I was 40 I was 30-40 pounds lighter and jogging and lifting weights more recreationally. As far as eating, just good home cooked meals, good water from our well, and breathing fresh mountain air.
![Cool 8-)](./images/smilies/icon_cool.gif)
3" Deficit Deadlift
Bar-10
155-5
265-5
385-5,5,5, Vid if 1st set
Romanian/Stiffleg Deadlift
341-5,5,
Press
Bar-10
155-2
237-5 - Push press - Vid
205-5,5, Strict - Vid
Plank Chins
BW+10lbs-5,5,5,
Dragon Flag abs - These weren't my best.
9,9,9,
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Leg press
0-10
90-5
180-5
270-5
360-10,10,10,
Hack squat
0-5
90-10,10, Both these and the leg press are getting hard.
Close grip bench - did these between leg presses and hack squats
Bar-15
155-5
265-2
342-1,1,1, Vid second set
287-5,5,
Incline DB press
65-10
85-15,15,
Lat pull downs at same angle as Incline press
90-10
135-10
180-17,17,
DB Concentration curls
25-15,15,
Suitcase abs - 28 - abs were fried from Dragon flags I guess. Had to take a couple of brief pauses to hit 28.
0-10
90-5
180-5
270-5
360-10,10,10,
Hack squat
0-5
90-10,10, Both these and the leg press are getting hard.
Close grip bench - did these between leg presses and hack squats
Bar-15
155-5
265-2
342-1,1,1, Vid second set
287-5,5,
Incline DB press
65-10
85-15,15,
Lat pull downs at same angle as Incline press
90-10
135-10
180-17,17,
DB Concentration curls
25-15,15,
Suitcase abs - 28 - abs were fried from Dragon flags I guess. Had to take a couple of brief pauses to hit 28.
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Squat
Bar-10
155-5
265-5
375-2
440-1
485-1 - vid
420-5,5, vid - second set was harder than the first, maybe a rep in the tank
Comp Bench
Bar-lots
155-5
265-1
315-1
357-1,1, Vid 1st set
308-5,5, - I meant to load 130kg/286lbs and do some crisp sets of 5. Loaded 140kg/308lbs and wondered why they seemed harder than they should. Didn't realize until I was finished that I had put more weight on the bar than I intended.
Did some GHR's & calf raises as well.
I need to think about progressing my bench as I seem to be stuck around the 165kg/363lb weight range for the past 6 months or so. My meet is 5 weeks out. Squat and deadlift are still moving up so happy with those.
Bar-10
155-5
265-5
375-2
440-1
485-1 - vid
420-5,5, vid - second set was harder than the first, maybe a rep in the tank
Comp Bench
Bar-lots
155-5
265-1
315-1
357-1,1, Vid 1st set
308-5,5, - I meant to load 130kg/286lbs and do some crisp sets of 5. Loaded 140kg/308lbs and wondered why they seemed harder than they should. Didn't realize until I was finished that I had put more weight on the bar than I intended.
Did some GHR's & calf raises as well.
I need to think about progressing my bench as I seem to be stuck around the 165kg/363lb weight range for the past 6 months or so. My meet is 5 weeks out. Squat and deadlift are still moving up so happy with those.
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Block pull off 3" blocks
Bar-10
155-5
265-3
375-2
462-1
240.5kg/529lbs-3 Vid
Romanian/Stiff leg deadlift
353-5,5, - adding 5kg/11lbs week, still going well
I'm dropping the OH press work for now since my meet is getting close and for me it doesn't seem to add to my bench.
DB Bench
35-10
65-10
105-10,10,10, vid - Although not as heavy as I normally bench with a barbell, these work the chest differently and possibly better as they want to pull the chest apart so to speak. I can definately feel these in the pec's. We'll see if it does anything for my comp bench.
Finished up with some tricep push downs mixed with DB curls for the girls for an arm pump.
Bar-10
155-5
265-3
375-2
462-1
240.5kg/529lbs-3 Vid
Romanian/Stiff leg deadlift
353-5,5, - adding 5kg/11lbs week, still going well
I'm dropping the OH press work for now since my meet is getting close and for me it doesn't seem to add to my bench.
DB Bench
35-10
65-10
105-10,10,10, vid - Although not as heavy as I normally bench with a barbell, these work the chest differently and possibly better as they want to pull the chest apart so to speak. I can definately feel these in the pec's. We'll see if it does anything for my comp bench.
Finished up with some tricep push downs mixed with DB curls for the girls for an arm pump.
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
My Right hip has been bugging me for the past few weeks. It feels a lot better between workouts, but hurts again after doing squats/deads or other leg work. Since Friday is an accessory day I will take today off from leg work and see if I can allow my hip to heal up before more heavy squats and deadlifts next week.
Close grip bench
Bar-lots
155-5
265-3
308-3,3,5, - Did these non stop to chest
220-12,10,10, Did these Spoto style stopping 2 inches or so above my chest, non stop constant tension
Tried a few dips but my shoulders started to disagree so stopped
DB rows
65-10
95-10,10,
Did some behind the neck cable tricep extensions and DB curls too
Close grip bench
Bar-lots
155-5
265-3
308-3,3,5, - Did these non stop to chest
220-12,10,10, Did these Spoto style stopping 2 inches or so above my chest, non stop constant tension
Tried a few dips but my shoulders started to disagree so stopped
DB rows
65-10
95-10,10,
Did some behind the neck cable tricep extensions and DB curls too
-
- Registered User
- Posts: 2903
- Joined: Fri Oct 20, 2017 2:03 pm
- Location: Ft Collins, Colorado
- Age: 40
Re: Skid (Marc's) Log
You think its a tendonitis thing? I used to get that when I was doing BBM high volume stuff.
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Don't know. I think the pain started with a tight muscle pulling on the joint causing discomfort. I waited too long to foam roll it out because I hate foam rolling. Hip stretches seemed to help too.
I finally loosend up the muscles that were tight but by then the joint was inflamed, and every heavy workout would never let the inflammation go down. Even yesterday it was bothering me but today I can barely feel it. I have a heavy squat workout tomorrow so we'll see how it holds up.
I might just ignore the pain and take some Ibuprofin to cover it up until my meet is over then take a few weeks off if I have to.
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Hip felt pretty good today. Beautiful spring day out here. Went for a long walk with the wife and then some yard clean up. Could feel the hip a bit after all that time on my feet.
Squat
Bar-10
155-5
265-5
375-2
446-1
490-1 vid - Went well
425-5,3, Vid of the 5 which was an 8.5; On the second set I didn't want to do any thing closer to 9 to save grinding on my hip so stopped at 3 reps
375-5 - back off set
Bench
bar-lots
155-5
265-1
315-1
363-1 vid
315-3,3,3, Did these tempo style non stop no rest at top or bottom
243-12 - back off set
Played around with the JM press with light weights. Seems like this exercise could cause elbow aids for me. Worked up to 90 pounds and stopped there. Didn't really feel it in my triceps, but will give it another chance later on. It's always good to start light on a new exercise anyways.
Did some calf raises and GHR's too.
Squat
Bar-10
155-5
265-5
375-2
446-1
490-1 vid - Went well
425-5,3, Vid of the 5 which was an 8.5; On the second set I didn't want to do any thing closer to 9 to save grinding on my hip so stopped at 3 reps
375-5 - back off set
Bench
bar-lots
155-5
265-1
315-1
363-1 vid
315-3,3,3, Did these tempo style non stop no rest at top or bottom
243-12 - back off set
Played around with the JM press with light weights. Seems like this exercise could cause elbow aids for me. Worked up to 90 pounds and stopped there. Didn't really feel it in my triceps, but will give it another chance later on. It's always good to start light on a new exercise anyways.
Did some calf raises and GHR's too.
- JohnHelton
- Registered User
- Posts: 4453
- Joined: Wed Apr 11, 2018 12:17 pm
- Location: Bozeman, MT
- Age: 51
- Contact:
Re: Skid (Marc's) Log
Big squat, Skid! Looking good.
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Thanks John! You're coming back strong too!
We hired a new planner at work today and it was my job to train him into our system. I looked at him and noted he seemed pretty swole. We got talking and he is a powerlifter too. We're going to get along good I can tell
![Cool 8-)](./images/smilies/icon_cool.gif)
Anyways we got discussing bench and he said he only did dumbbells for a year after stalling around 315. Working up to 125lb dumbbells for 8-10+ reps. He started using a barbell again and found he was in the 385 range after that, and because he had packed on more muscle with DB's found that increasing that up to 405 wasn't too hard.
I think I will do more DB work going forward!
Deadlifts - Not feeling 100% today. Headache all day, a sore muscle under my right rib cage (had this before), and not so great sleep last night. Anyways my deadlift didn't go quite as well as I wanted today so those are my excuses. Still not too bad of a day anyways.
Bar-10
155-5
265-3
375-1
463-1
240.5kg/529-2 Vid - I certainly made these look hard, didn't get my 3rd rep, but still nearing PR territory so I can't be too disappointed
485-1 Hey, got to count this as I took off 20 kilos so I could lift it onto the rack to take the 25 kilo weights off.
Romanian/Stiffleg deadlifts
364-5,5, - For some reason I really like doing these. Probably because they aren't super heavy.
DB Bench
65-10
120-5,5, - Vid below - I really hate these hexagon dumbbells. They have the goofy tapered and poorly knurled handles, and are larger in diameter than my steel dumbbells. Plus the edges of the hexagon are somewhat sharp and I dug one into my right nipple on the first set. I going to sell these.
85-15 back off set
DB 1 arm rows
85-10
120-8
Did some cable tricep pushdowns too as a finisher.
Last edited by Skid on Wed Feb 21, 2024 8:12 pm, edited 1 time in total.
- DanCR
- Registered User
- Posts: 3681
- Joined: Sat Dec 14, 2019 11:06 am
- Location: Louisiana / New York
- Age: 45
Re: Skid (Marc's) Log
Got same story from a guy a year or so back. Was repping 315 at like 175 lbs. I asked wtf, and he said that he’d hurt a shoulder in such a way that barbell bench didn’t feel good, but he discovered that DBs felt fine and spent a year or so running up his strength with them. When he came back to the barbell, he found that three wheels, which had eluded him previously, was a piece of cake.Skid wrote: ↑Wed Feb 21, 2024 7:45 pm Anyways we got discussing bench and he said he only did dumbbells for a year after stalling around 315. Working up to 125lb dumbbells for 8-10+ reps. He started using a barbell again and found he was in the 385 range after that, and because he had packed on more muscle with DB's found that increasing that up to 405 wasn't too hard.
-
- Registered User
- Posts: 143
- Joined: Wed Jan 10, 2024 10:15 pm
- Age: 48
- Contact:
Re: Skid (Marc's) Log
If you can deadlift 240kg for 2 reps on a bad day, then you’re having a better day than most. ![🙂](//cdn.jsdelivr.net/gh/twitter/twemoji@latest/assets/svg/1f642.svg)
Duly noted. Dumbbell bench press it shall be once I switch back to gaining. My bench press has always sucked.DCR wrote: ↑Wed Feb 21, 2024 7:57 pmGot same story from a guy a year or so back. Was repping 315 at like 175 lbs. I asked wtf, and he said that he’d hurt a shoulder in such a way that barbell bench didn’t feel good, but he discovered that DBs felt fine and spent a year or so running up his strength with them. When he came back to the barbell, he found that three wheels, which had eluded him previously, was a piece of cake.Skid wrote: ↑Wed Feb 21, 2024 7:45 pm Anyways we got discussing bench and he said he only did dumbbells for a year after stalling around 315. Working up to 125lb dumbbells for 8-10+ reps. He started using a barbell again and found he was in the 385 range after that, and because he had packed on more muscle with DB's found that increasing that up to 405 wasn't too hard.
- DanCR
- Registered User
- Posts: 3681
- Joined: Sat Dec 14, 2019 11:06 am
- Location: Louisiana / New York
- Age: 45
Re: Skid (Marc's) Log
Not a science guy and not speculating on why, but I think it’s important that, in both scenarios, DB bench wasn’t an accessory - it was the movement and was pushed. When I finally managed a 300 bench recently, I had spent a few weeks having DB only days in between my barbell bench days. I had never DB benched more than, I think, 80s, in my life. I ended up running a low incline DB bench to repping 100s and voila - I had a 300 bench. (Of course I then switched up everything, including ditching the heavy DB day, because I can never do anything intelligent in the gym for an extended period.)MailmanMuscle wrote: ↑Wed Feb 21, 2024 9:46 pm If you can deadlift 240kg for 2 reps on a bad day, then you’re having a better day than most.
Duly noted. Dumbbell bench press it shall be once I switch back to gaining. My bench press has always sucked.DCR wrote: ↑Wed Feb 21, 2024 7:57 pmGot same story from a guy a year or so back. Was repping 315 at like 175 lbs. I asked wtf, and he said that he’d hurt a shoulder in such a way that barbell bench didn’t feel good, but he discovered that DBs felt fine and spent a year or so running up his strength with them. When he came back to the barbell, he found that three wheels, which had eluded him previously, was a piece of cake.Skid wrote: ↑Wed Feb 21, 2024 7:45 pm Anyways we got discussing bench and he said he only did dumbbells for a year after stalling around 315. Working up to 125lb dumbbells for 8-10+ reps. He started using a barbell again and found he was in the 385 range after that, and because he had packed on more muscle with DB's found that increasing that up to 405 wasn't too hard.
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
Leg press
sled-5
90-5
180-5
270-5
360-5
410-10,10,10,
Hack squat
Sled-5
110-10,10,
Mixing up my bench now - Monday comp, Wednesday DB's, Today narrow and wide grip
Extreme narrow grip bench - middle finger on the smooth
265-5,5,5, few reps in the tank - new exercise so started easy
Extreme wide grip - Max comp width - index on the rings
Worked up to 308 for a few sets of 3 - again a few reps in the tank
Lat pull down
180-16,16,
sled-5
90-5
180-5
270-5
360-5
410-10,10,10,
Hack squat
Sled-5
110-10,10,
Mixing up my bench now - Monday comp, Wednesday DB's, Today narrow and wide grip
Extreme narrow grip bench - middle finger on the smooth
265-5,5,5, few reps in the tank - new exercise so started easy
Extreme wide grip - Max comp width - index on the rings
Worked up to 308 for a few sets of 3 - again a few reps in the tank
Lat pull down
180-16,16,
- Skid
- Registered User
- Posts: 1813
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Skid (Marc's) Log
3 weeks out from my meet. Just doing comp lifts at high intensity and low volume to start dropping fatigue
Squat
Bar-10
155-5
265-3
375-1
451-1
500.5 Lb/227.5kg-1 PR! - Vid below. Felt this moved pretty well. 235kg/517lbs gets me a National record if I can do it in my meet. It looks at least possible.
441lb/200.5kg-3,3, Second vid - Had at least a couple reps in the tank for the first set, less for the second
Bench - Saw a video about optimum grip for bench which they said is twice your collar bone length. For me, that puts my index finger on the rings which is maximum legal grip in IPF. Figured I'd give it a try
Bar-lots
155-5
265-1
320-1
369-Fail - Came pretty close but couldn't lock it out. I figured I might as well test it at what I thought my maximum bench would be using my normal grip. Went back to my normal grip for the rest of the workout.
353-1,1, - dropped weight a little since I did a pretty good grind trying to get 369
320-3,3,
Squat
Bar-10
155-5
265-3
375-1
451-1
500.5 Lb/227.5kg-1 PR! - Vid below. Felt this moved pretty well. 235kg/517lbs gets me a National record if I can do it in my meet. It looks at least possible.
441lb/200.5kg-3,3, Second vid - Had at least a couple reps in the tank for the first set, less for the second
Bench - Saw a video about optimum grip for bench which they said is twice your collar bone length. For me, that puts my index finger on the rings which is maximum legal grip in IPF. Figured I'd give it a try
Bar-lots
155-5
265-1
320-1
369-Fail - Came pretty close but couldn't lock it out. I figured I might as well test it at what I thought my maximum bench would be using my normal grip. Went back to my normal grip for the rest of the workout.
353-1,1, - dropped weight a little since I did a pretty good grind trying to get 369
320-3,3,
- DanCR
- Registered User
- Posts: 3681
- Joined: Sat Dec 14, 2019 11:06 am
- Location: Louisiana / New York
- Age: 45