Carbon Steel pans/heat diffusers
Moderator: d0uevenlift
- Root
- Grillmaster
- Posts: 1997
- Joined: Fri Sep 15, 2017 8:28 am
- Location: Western Upper Lower
- Age: 44
Re: Carbon Steel pans/heat diffusers
Got the pan tonight. Seasoned with salt and oil and potato peels. Cooked bacon bits, and the bits at the edge sizzled the same as the ones in the middle. Cooked an egg and it slid around in just a minuscule amount of butter. Cooked brussels sprouts and they crisped up brown and delicious.
With each thing I cooked, it got smoother and more beautiful.
I'm done with cast iron.
With each thing I cooked, it got smoother and more beautiful.
I'm done with cast iron.
- Hanley
- Strength Nerd
- Posts: 8753
- Joined: Fri Sep 15, 2017 6:35 pm
- Age: 46
Re: Carbon Steel pans/heat diffusers
It's weird that they're not more popular in the US.Root wrote: ↑Mon Dec 03, 2018 6:16 pm Got the pan tonight. Seasoned with salt and oil and potato peels. Cooked bacon bits, and the bits at the edge sizzled the same as the ones in the middle. Cooked an egg and it slid around in just a minuscule amount of butter. Cooked brussels sprouts and they crisped up brown and delicious.
Now, now. The thinner stuff is really good. But similar in performance to the carbon steel pans. Which are cheaper.
- Root
- Grillmaster
- Posts: 1997
- Joined: Fri Sep 15, 2017 8:28 am
- Location: Western Upper Lower
- Age: 44
Re: Carbon Steel pans/heat diffusers
Well I'm done with my thick, bumpy, shitty cast iron.
Who makes this thin cast iron you speak of?
- Root
- Grillmaster
- Posts: 1997
- Joined: Fri Sep 15, 2017 8:28 am
- Location: Western Upper Lower
- Age: 44
Re: Carbon Steel pans/heat diffusers
Cooked a prime ribeye in it. In ghee. So crusty and good.
- Hanley
- Strength Nerd
- Posts: 8753
- Joined: Fri Sep 15, 2017 6:35 pm
- Age: 46
- Root
- Grillmaster
- Posts: 1997
- Joined: Fri Sep 15, 2017 8:28 am
- Location: Western Upper Lower
- Age: 44
- omaniphil
- Registered User
- Posts: 1889
- Joined: Sat Sep 16, 2017 10:41 pm
- Location: Cleveland, OH
- Age: 42
Re: Carbon Steel pans/heat diffusers
You sold me on this idea of carbon steel pans. I saw the America Test Kitchen videos and the eggs were sliding around which was cool, but it looked like a ton of fat. If they can do it with just a little oil, I'm definitely sold on this.
I'm in the process of selling my house and definitely dont need any extra pans at this point in my life, but once things settle down in mid January, I will definitely be purchasing one of these pans.
I'm in the process of selling my house and definitely dont need any extra pans at this point in my life, but once things settle down in mid January, I will definitely be purchasing one of these pans.
Was it the flavor that did it for you or the high smoke point? I have ghee in the house for indian food, but have never used it for meat etc. I probably should.
- Manveer
- M3N4C3
- Posts: 2411
- Joined: Wed Sep 13, 2017 5:46 pm
- Location: CA
- Age: 39
- Hanley
- Strength Nerd
- Posts: 8753
- Joined: Fri Sep 15, 2017 6:35 pm
- Age: 46
Re: Carbon Steel pans/heat diffusers
- Manveer
- M3N4C3
- Posts: 2411
- Joined: Wed Sep 13, 2017 5:46 pm
- Location: CA
- Age: 39
Re: Carbon Steel pans/heat diffusers
Yes, except the hood. Trying to figure out what CFM I really need for an island hood over a 36” cooktop. Seems like 375 min. Probably will go with something 550-600 though.
Nothing is installed yet...remodeling the kitchen.
- Skid
- Registered User
- Posts: 1814
- Joined: Sun Oct 15, 2017 9:11 am
- Location: Paradise Valley
- Age: 60
Re: Carbon Steel pans/heat diffusers
You may want to avoid Teflon lined pans made before 2014. Apparently they make you smaller...
https://www.dailymail.co.uk/health/arti ... -pans.html
https://www.dailymail.co.uk/health/arti ... -pans.html
- iamsmu
- Registered User
- Posts: 4970
- Joined: Sun Sep 17, 2017 5:52 pm
- Location: Handicap: +.3
- Age: 49
- Contact:
Re: Carbon Steel pans/heat diffusers
I have a Zephyr that goes to 685 cfm (IG below)! Powerful. Since it's not vented outside, it's a disaster. It just pushes smoke to all corners of the house. It would be great if I could run it outside. You'll be happy. . . (And it didn't cost nearly $2k. They might make $2k models, I dunno, but that sounds insane. This was like 1/4th or so of that. I can't recall.) It's so powerful, that if it were vented out, I'm sure that my furnace would start to backdraft.Manveer wrote: ↑Tue Dec 04, 2018 7:57 pmYes, except the hood. Trying to figure out what CFM I really need for an island hood over a 36” cooktop. Seems like 375 min. Probably will go with something 550-600 though.
Nothing is installed yet...remodeling the kitchen.
I have strong but irritating Panasonic bathroom fans. They pull 200 or so. It's not nearly strong enough for lots of smoke. The low setting on the Zephyr is 200. In general that would be fine for most cooking in a small kitchen. But I would get something that can reach 600+ at peak. You will probably run it much lower most of the time.
- omaniphil
- Registered User
- Posts: 1889
- Joined: Sat Sep 16, 2017 10:41 pm
- Location: Cleveland, OH
- Age: 42
Re: Carbon Steel pans/heat diffusers
When we remodeled our kitchen a few years ago, I made sure that the range was up against an outside wall to make venting to the outside easier. It was a game changer. I used to preemptively remove the battery from the smoke detector whenever cooking steak or other meats. Thing of the past with a vented hood.
- iamsmu
- Registered User
- Posts: 4970
- Joined: Sun Sep 17, 2017 5:52 pm
- Location: Handicap: +.3
- Age: 49
- Contact:
Re: Carbon Steel pans/heat diffusers
Ya. Recirculating hoods suck. High powered ones suck in unexpected ways. . . . A few weeks ago we discovered that Nest smoke alarms won't allow you to mute them if the smoke percentage is too high. This was pretty frustrating. "Sorry. I cannot silence the alarm. The smoke level is too high. . ." The UPS guy came when this was happening. 5 or 6 of these were going off all over and refusing to shut up. . . I'm going to tunnel a vent outside between the floors for the fan. It's not that much demo if the joist are aligned the right way. There's about 10" between the floors, so I might be able to use some narrow rectangular venting if I have to go perpendicular. But I'll have to rip out so much ceiling to get it done. . . .omaniphil wrote: ↑Wed Dec 05, 2018 7:11 pmWhen we remodeled our kitchen a few years ago, I made sure that the range was up against an outside wall to make venting to the outside easier. It was a game changer. I used to preemptively remove the battery from the smoke detector whenever cooking steak or other meats. Thing of the past with a vented hood.
- Manveer
- M3N4C3
- Posts: 2411
- Joined: Wed Sep 13, 2017 5:46 pm
- Location: CA
- Age: 39
Re: Carbon Steel pans/heat diffusers
Cool. The hood definitely vents to outside.iamsmu wrote: ↑Wed Dec 05, 2018 5:40 pmI have a Zephyr that goes to 685 cfm (IG below)! Powerful. Since it's not vented outside, it's a disaster. It just pushes smoke to all corners of the house. It would be great if I could run it outside. You'll be happy. . . (And it didn't cost nearly $2k. They might make $2k models, I dunno, but that sounds insane. This was like 1/4th or so of that. I can't recall.) It's so powerful, that if it were vented out, I'm sure that my furnace would start to backdraft.Manveer wrote: ↑Tue Dec 04, 2018 7:57 pmYes, except the hood. Trying to figure out what CFM I really need for an island hood over a 36” cooktop. Seems like 375 min. Probably will go with something 550-600 though.
Nothing is installed yet...remodeling the kitchen.
I have strong but irritating Panasonic bathroom fans. They pull 200 or so. It's not nearly strong enough for lots of smoke. The low setting on the Zephyr is 200. In general that would be fine for most cooking in a small kitchen. But I would get something that can reach 600+ at peak. You will probably run it much lower most of the time.
Probably going to get the Zephyr ZEME42DS. Should be plenty, at the low low price of $1300.
- Root
- Grillmaster
- Posts: 1997
- Joined: Fri Sep 15, 2017 8:28 am
- Location: Western Upper Lower
- Age: 44
Re: Carbon Steel pans/heat diffusers
Both. Yes, you should. At least for steak.
I also just purchased some avocado oil, which is supposed to have the highest smoke point of any cooking oil.
All this talk about hoods is making me envious. Mine is really shitty and doesn't vent.
- Hanley
- Strength Nerd
- Posts: 8753
- Joined: Fri Sep 15, 2017 6:35 pm
- Age: 46